Tips for Painting Your Hardwood Floors

  • admin-author
  • November 16, 2016
  • 0
If you want to make your hardwood floors look new without refinishing them or buying new hardwood flooring, you can paint them. This is a project you could do yourself, but make sure to do it correctly the first time or you might have to hire someone to redo the paint job. Here are several essential tips to help you beautifully paint your hardwood floors:

Scuff-Sand the Floor Before Painting

To prepare the hardwood flooring for painting, you must scuff-sand it with 150-grit sandpaper. The goal is to rough up the wood flooring enough for the primer to stick well to the wood. You’re not going for a smooth surface yet.

Thoroughly Clean the Floor

Before you paint wood flooring, you must thoroughly clean it. Dusting and mopping it isn’t good enough. You must vacuum the dust, then use a wood floor cleaner on the floors. Allow the wood floors to dry for two days before continuing. If the flooring is still moist, wait longer until they are completely dry. It’s important to let the hardwood floors dry because moisture can cause bubbles during painting.

Prime the Wood Floors

An oil-based primer is ideal for priming hardwood floors, but you could use a high quality latex primer too. If you use an oil-based primer, always buy oil-based paint as well. If you use a latex primer, then go for latex paint. For oil products, let the floor dry for at least 24 hours. A latex primer can dry overnight.

Sand the Floor After It’s Primed

To prevent imperfections from showing through the completed paint job, you should sand the wood floors after priming them. It might seem unnecessary because you sanded before priming, but it is a crucial step. This time, you must also sand with 220-grit sandpaper instead of 150-grit.

Use a Tack Cloth to Wipe the Dust from the Floor

After sanding, use a tack cloth to wipe the dust from the hardwood floors. Cotton rags and paper towels shouldn’t be used because they leave fibers behind on the floor that can ruin the paint job.

Paint Each Coat as Thinly as Possible

Be conservative with the paint as you brush or roll it onto the wood flooring. If you paint too thickly, it will take longer to dry and won’t look as good. When using a roller to paint the floor, take it slow to prevent bubbles from forming. A 1/4-nap microfiber roller works best as a roller for painting hardwood floors. When it comes to brushes, choose a natural bristle brush for best results.

Painting your hardwood floors is a fun painting project you can do yourself. Because it will span over several days to do it correctly, you definitely don’t want to make any mistakes and have to redo the project. While you may enjoy painting the floors, it still takes a bit of your time. Follow the tips above to ensure your painting project runs smoothly. You can find more resources available at the Relative Space website.

Previous «
Next »

Leave a Reply

Your email address will not be published. Required fields are marked *